Vodavi Starplus Triad-S, Manual

Page: 96 / 512

2-70 CO Line - Incoming Ringing Assignment
Chapter 2 - Features and Operation
Programming Steps
1. Press
FLASH
and dial
[40]
. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the RING ASSIGNMENT flexible button (FLASH 40, Page A, Button #10) . The
display shows the following information:
5. Enter a valid Destination (DDD) or (DDDD) and Ring type (R) followed by the HOLD
button. A confirmation tone sounds and the display updates.
CO LI N E AT T R I B U T E S
S E LE C T A CO L IN E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X X X PAG E A
E N T E R B U T TO N N U M B E R
RI N G AS S I G N M E N T S
E N T E R D DD R
The actual LCD displays a 3-digit destination field (DDD), but both a 3- or 4-digit
entry is possible.