Vodavi Starplus Triad-S, Manual

Page: 315 / 512

Attendant Setting Time and Date 3-13
Chapter 3 - Attendant Features and Operation
Programming Steps
1. Press the ATTN OVERRIDE flexible button
(FLASH 05, Button #1)
.
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Attendant Override is disabled.
Operation
To call a station busy on a CO call:
Press the preprogrammed ATTN OVERRIDE button [601]. Three short tone bursts are
presented to the called party.
After five (5) seconds, the station’s CO line is automatically placed on hold and the
Attendant is cut-through.
To call a station in Do Not Disturb mode:
Press the preprogrammed ATTN OVERRIDE button. The station is signaled with a
Camp On tone.
Attendant Setting Time and Date
Description
The System Time/Date must be set by the first programmed Attendant via admin
programming or by using feature code 692.
Programming Steps
To set the time and date that appears on display telephones:
1. Press FLASH and dial [11] . The following message displays:
MM M = Month
DD = Day
YY = Year
HH= Hour
MM = Minute
AT T E N DA N T O VE RR I D E 1-0
D I S A B LE D
Attendant Override functions ONLY when the Attendant station is assigned a
flexible button designated as Attendant Override.
D AT E AN D T I M E
M M M D D Y Y
H H : M M a m