Vodavi Starplus Triad-S, Manual

Page: 90 / 512

2-64 CO Line Group
Chapter 2 - Features and Operation
DTMF On/Off Time Operation
Description
The DTMF On/Off Time feature lets the installer select the DTMF On/Off Time on a
system-wide basis. This lets the installer customize the system for certain applications that
require more than the standard DTMF Time of 100ms on and 100ms off.
Programming Steps
1. Press the DTMF TIME OPERATION flexible button (FLASH 02, Button #6) . The following
message displays:
2. Enter a valid number (1-9) on the dial pad for the DTMF On and Off Times (100-900 ms).
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … DTMF Time Operation is set for 100 ms On and 100 ms Off.
CO Line Group
Description
Outside lines can be placed in one of twenty-four groups if the customer's business requires
such grouping. Stations are then individually assigned access to these groups and given the
ability to dial on particular lines.
Line Group Access - Station
Description
A station can access any combination of outside line groups, or a station may not be allowed
access to outside lines. CO line groups are used primarily by single line telephones or for
flexible buttons assigned as pooled group buttons on a Key Telephone.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed
station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51] . Flexible button #24 (New Range) is lit and one of
the following messages displays:
D T M F ON /O F F T I M E 1-9
1
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
S TAT IO N AT T R IB UT E S
S E L E C T A S TAT I O N R A N G E E N T E R S TAT IO N N U M B E R