Vodavi Starplus Triad-S, Manual

Page: 89 / 512

CO Line DTMF Sending 2-63
Chapter 2 - Features and Operation
CO Line DTMF Sending
Each CO interface circuit for outside lines can be individually programmed to send DTMF
(tone) or dial pulse signals.
DTMF / Dial Pulse Programming
Description
Each individual outside line can be programmed to be DTMF (tone) or dial pulse.
Programming Steps
1. Press FLASH and dial [40] . The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the DTMF/DIAL PULSE flexible button
(FLASH 40, Page A, Button #1)
.
5. Enter a 0 or 1 that corresponds with the following entries:
[0] = Dial Pulse
[1] = DTMF
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … All lines are set for DTMF.
CO L IN E AT T R I B U T E S
S E LE C T A CO L I N E R AN G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R
PU L S E / D T M F 0-1
DT M F