Vodavi Starplus Triad-S, Manual

Page: 112 / 512

2-86 CO Port Parameters
Chapter 2 - Features and Operation
5. Enter a valid number (0-3) on the dial pad which corresponds to the desired CO type:
[0] = Out-of-Service (OOS)
[1] = Incoming Only
[2] = Outgoing Only
[3] = Both Incoming and Outgoing
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … All CO Lines default to both incoming and outgoing type.
Conditions
»
For PRI cards, the 24th channel must be marked as Out-of-Service (OOS). This is true on all
PRI cards, not just for networking.
CO Port Parameters
Initialize CO Port Assignments / Flexible Numbering Assignments
Description
CO Port Parameters and Flexible Numbering Assignments can be initialized to default values.
Refer to
“FLASH 52” on page C-17 , within Table C-1 , for default values of Flexible Numbering
Assignments.
Programming Steps
1. Press the CO PORTS/COD flexible button ( FLASH 80, Button #4 ).
2. The following message displays:
3. Press the HOLD button. A confirmation tone sounds.
IN IT IA LI Z E CO P OR T S /C OD
PR E S S H OL D