Vodavi Starplus Triad-S, Manual

Page: 75 / 512

Camp On 2-49
Chapter 2 - Features and Operation
SINGLE LINE TELEPHONE
To alert a busy station of your call:
1. Briefly depress and release the hookswitch.
2. Dial [620]. When the called line is alerted, they can choose to pick up your call or remain
on original call.
To answer a call that is waiting ( while on a CO line call) :
1. Receive Camp on warning tone through the handset.
2. Choose desired call (hang up on present call and take new call, or ignore Camp On
signal).
Conditions
»
The CAMP ON button can be assigned on 8-button phones using code 620.
»
Calls cannot be camped on when a station is in DND or in Conference.
»
If the party that initiated the Camp On hangs up, then Camp On is canceled and the call is
blind-transferred.
Camp On Button Flash Rate
Description
The Camp On button flash rate is the rate at which the Camp On button flashes when you
receive a Camp On. This flash rate can be programmed to 29 different options identified in
the flash rate table. This enables the programmer to customize the key system configuration
to desired flash rates.
Programming Steps
1. Press the CAMP ON BTN flexible button (FLASH 07, Button #15) . The following message
displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to Table 2-11 on page 2-130 .)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Camp On Button flash rate is set for a Red 120 ipm Flash (10).
Camp On Recall
Description
When a station does not answer a Camp On, that call recalls the person placing the Camp On,
and if unanswered by them, recalls the Attendant(s).
C AM P ON B T N 00- 28
R E D 1 2 0 IP M F L AS H