Vodavi Starplus Triad-S, Manual

Page: 130 / 512

2-104 Direct Inward System Access (DISA)
Chapter 2 - Features and Operation
DISA CO-to-CO
Description
The DISA CO-to-CO (or Conference) option on the CO line governs a DISA caller’s ability to
access other outside lines. CO lines must have DISA CO-to-CO enabled to allow a DISA caller
to establish an outgoing CO-to-CO connection. This allows for specific CO line access
restriction on DISA calls. A station with Conference enabled can initiate a conference on CO
lines regardless of the CO line conference marking.
The CO line conference flag affects a DISA caller’s ability to access outgoing CO lines as
shown in the following table:
Programming Steps
1. Press FLASH and dial [40] . The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the DISA CO-TO-CO flexible button (FLASH 40, Page A, Button #4) .
Table 2-6: CO Line Conference Flag
Incoming DISA CO
DISA Caller Attempts to Access
CO-to-CO Enabled CO-to-CO Disabled
CO-to-CO Enabled Call Allowed Call Denied
CO-to-CO Disabled Call Denied Call Denied
C O L I N E AT T R IB U T E S
S E L E C T A C O L I N E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X X X - X X X PAG E A
E N T E R B U T TO N N U M B E R