Vodavi Starplus Triad-S, Manual

Page: 227 / 512

Relay Programming 2-201
Chapter 2 - Features and Operation
To activate a redial:
Press the preprogrammed REDIAL flexible button,
-or-
Press the ON/OFF button,
-or-
Lift the handset, line is seized and number is dialed. If the user receives a busy/no answer,
they may repeat the step to activate another redial.
To cancel the operation:
Press the preprogrammed REDIAL flexible button. A confirmation tone sounds and the Auto
Redial function is cancelled.
SINGLE LINE TELEPHONE
Not applicable
Conditions
»
Once the user presses the preprogrammed flexible button, the timer applies when the
user enters a digit. After a digit is entered, the inter-digit timer applies between the digits.
Relay Programming
Description
There are two relays on the BKSU that can be programmed to perform certain functions.
These functions are loud bell, external page control, RAN start, and CO Line control.
Programming Steps
1. Press FLASH and dial [14] . Button #1 is lit to indicate Relay #1 is selected. The following
message displays:
X = 1-2
YYYYYYYYYYYY = Ext Page Zone, LBC Sta XXX, Ran Start X, CO Control XX
RELAY
1
RELAY
2
✺
1 Q
✺
2 W
✺
3 E
✺
4 R
✺
5 T
✺
6 Y
✺
7 U
✺
8 I
R E L AY X T Y P E
Y Y Y Y Y Y Y Y Y Y Y Y