Vodavi Starplus Triad-S, Manual

Page: 180 / 512

2-154 Inter-Digit Time-Out
Chapter 2 - Features and Operation
Intercom Transfer
To use Intercom Transfer without DSS Buttons:
1. Receive or make an intercom call.
2. Press the TRANS button. Intercom dial tone sounds.
3. Dial the station.
4. When the second station answers, you are in a supervised transfer mode (first station is
staged for transfer).
5. Hang up (stations 1 and 2 are connected).
To use Intercom Transfer with DSS Buttons:
1. Receive or make an intercom call using a DSS button.
2. Press the TRANS button. Intercom dial tone sounds.
3. Press the DSS button where to transfer the call.
4. Hang up (stations 1 and 2 are connected).
Inter-Digit Time-Out
The Inter-Digit Time-Out feature allows programming of the inter-digit time-out on a
system-wide basis. This feature applies to intercom and LCR calls. DISA inter-digit time-out
remains unaffected by this timer. The Inter-Digit Time-out setting is variable from
1-99 seconds.
Programming Steps
1. Press the INTER-DIGIT TIMEOUT flexible button (FLASH 01, Button #20) . The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 01-99 seconds in 1-second
increments.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Inter-Digit Time-out is set for 5 seconds.
Keyset Mode
Description
The Keyset Mode feature (digital KTU only) allows the station user to determine the mode in
which the Digital Telephone with CTI Box and Wanderer (optional) operates. The six modes
are: Inactive mode, PC Phone mode, ATD Command mode, ATH Command mode, CKTU
mode, and SPI mode. Through the use of a dial code, the station user can also determine the
baud rate for each mode selected. This setting is stored in back-up memory in the event of a
power outage or system reset.
I N T E R DI G I T T / O 01- 99
0 5