Vodavi Starplus Triad-S, Manual

Page: 170 / 512

2-144 Hold - Preference
Chapter 2 - Features and Operation
Hold - Preference
Description
The Hold Preference feature allows either System or Exclusive hold as the primary hold on the
first depression of the HOLD button, depending upon programming. A second depression
invokes the second hold preference.
Programming Steps
1. Press the HOLD PREF flexible button (FLASH 05, Button #2) .
2. Enter a valid number (0 or 1) that corresponds with the following entries:
[0] = Exclusive Hold
[1] = System Hold
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Hold Preference is System Hold.
Hold - System
When a line is placed on System Hold, any station in the system with an appearance of that
line can retrieve the call.
System Hold Flash Rate
Description
The System Hold flash rate is the rate at which a CO Line button or Loop button flashes when
a call is placed on System Hold. This flash rate can be programmed to 29 different options
identified in the flash rate table. This enables the programmer to customize the key system
configuration to desired flash rates.
Programming Steps
1. Press the SYSTEM HOLD flexible button (FLASH 07, Button #13) . The following displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to Table 2-11 on page 2-130 .)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … System Hold flash rate is set for a Red 60 ipm Double Wink (04).
H OL D PR E F E R E N C E 0-1
S YS T E M
S YS T E M H OL D 00-28
RE D 6 0 I PM DB L W IN K