Vodavi Starplus Triad-S, Manual

Page: 194 / 512

2-168 Message Waiting Reminder Tone
Chapter 2 - Features and Operation
4. Replace the handset or press the ON/OFF button to end the call.
To answer a message waiting indication:
If your MSG button is lit, you have a message waiting for you. The first message left is the first
one called.
1. Press MSG. Station that left message is signaled with tone ringing.
2. If called station does not answer, press MSG once to leave message.
SINGLE LINE TELEPHONE
To leave a message waiting indication:
1. Lift the handset.
2. Dial the desired intercom station. Receive no answer or DND tone sounds.
3. Briefly depress and release the hookswitch.
4. Dial [623].
5. Hang up.
To answer a message waiting indication (your message waiting lamp is flashing or
there is an interrupted dial tone when you lift the handset):
1. Lift the handset.
2. Dial [663]. Station that left message will ring.
Conditions
»
8-button phones use code 623 to assign a MESSAGE WAITING button.
Message Waiting Reminder Tone
Description
The Message Wait Reminder Timer determines the time between repeated reminder tones to
a key telephone with a message waiting. Digital station users may be reminded of a message
waiting on their telephone with an audible signal presented at a timed interval. The Message
Wait Reminder Tone setting is variable from 000-104 minutes.
Programming Steps
1. Press the MESSAGE WAIT REMINDER TONE flexible button (FLASH 01, Button #13) .
2. Enter a valid number on the dial pad that corresponds to 000-104 minutes.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Message Wait Reminder Tone is set at 000 (disabled).
Up to five messages can be left at any Station.
M / W TO N E T I M E R 000 -1 04
0 0 0