Vodavi Starplus Triad-S, Manual

Page: 393 / 512

Programming LCR Tables B-5
Chapter - Least Cost Routing
Operation (When LCR is Enabled)
To place an Outside Call:
1. Dial [9] on the dial pad,
-or-
Press preprogrammed LCR button.
2. Dial the desired telephone number.
3. Wait for an answer. Lift handset or use the speakerphone to converse.
If all available lines are busy, remain off-hook for four seconds to automatically be queued
onto LCR for an available line, then hang up.
To answer an LCR Queue Call Back:
1. When telephone is signaled, answer the call.
2. Desired telephone number is automatically redialed.
CO Line Queue Cancel
To cancel a Call Back Request:
1. Dial the CO Line Queue Cancel code [626] on the dial pad.
2. Replace handset or press ON/OFF button.
Programming LCR Tables
Description
The Least Cost Routing (LCR) feature allows automatic selection of the most economical
trunk according to the number dialed and the time of the day and day of the week. There are
eight (8) different tables set up to monitor the dialing of digits of a station and to select the
best route programmed for the call.
The buttons on the digital telephone are defined as shown when entering the LCR Tables
Programming area:
Only one LCR Queue Call Back request may be initiated by a station. When a
second request is made, the first request is cancelled.
If the 911 feature is enabled, the LCR access code is 800 instead of 9.
Flash 05, button #7 must be used to enable the Least Cost Routing feature.
3-DIGIT
TABLE
6-DIGIT
TABLE
EXCEPTION
TABLES
ROUTE LIST
TABLE
✺
1 Q
✺
2 W
✺
3 E
✺
4 R
INSERT /
DELETE TABLE
DAILY TIME
TABLE
WEEKLY TIME
TABLE
TOLL
INFORMATION
✺
5 T
✺
6 Y
✺
7 U
✺
8 I