Vodavi Starplus Triad-S, Manual

Page: 98 / 512

2-72 CO Line - Incoming Ringing Assignment
Chapter 2 - Features and Operation
Incoming CO Line Ringing - Setting Flash Rate
Description
The Incoming CO Line Ringing flash rate is the rate at which an Incoming CO line or Loop
Button flashes. This flash rate can be programmed to 29 different options identified in the
flash rate table, which enables the programmer to customize the key system configuration to
desired flash rates.
Programming Steps
1. Press the INC CO RING flexible button (FLASH 07, Button #1) . The following message
displays:
2. Enter a valid number (00-28) on the dial pad that correspond to one of the 29 available
options. (Refer to Table 2-11 on page 2-130 .)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Incoming CO Ringing flash rate is set for RED 480 ipm Flutter (08).
Display Ring Assignments
Description
Programming Steps
1. Press
FLASH
and dial
[40]
. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
Flexible button #19 (Page A) is lit. The following message displays to indicate current
programming of that line or group of lines:
XXX-XXX = CO Line Range
IN C C O R I N G 00-28
RE D 4 8 0 I PM F LU T T E R
CO L I N E AT T R I B U T E S
S E L E C T A C O L I N E R AN G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
X XX - X X X PAG E A
E N T E R B U T TO N N U M B E R