Vodavi Starplus Triad-S, Manual

Page: 403 / 512

Programming LCR Tables B-15
Chapter - Least Cost Routing
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … LCR Call Progress feature is enabled.
Default LCR Database
Description
In an effort to decrease installation and set up time usually associated with LCR, a default LCR
database was incorporated.
The default LCR database provides basic routing for local and long distance dialing. Default
entries have been made in the 3-Digit Table for local office codes (NNXs) and all area codes
(NPAs). Six routes have been established with the default database for routing of all calls
under default.
Forced Least Cost Routing (LCR)
Description
Stations may be forced to place outgoing CO calls by use of LCR (dial [9]) to access an outside
line. This lets the system administrator control dialing patterns and lines used for outgoing
CO calls. This can be enabled/disabled on a per-station basis for additional flexibility and
control. Forced LCR is optional (disabled) for all stations, and eliminates access to all other
line groups.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
Programming Steps
1. Press FLASH and dial [50] or dial [51] . Flexible button #24 (New Range) is lit and one of
the following messages displays:
2. Enter the range of
fixed
station numbers (100-131) to be programmed. If only one station
is being programmed, enter that number twice, e.g., [100 100].
-or-
Enter a valid flexible number (100-8999) to be programmed.
Flash 50 - Fixed Numbers Flash 51 - Flexible Numbers
S TAT IO N AT T R IB UT E S
S E L E C T A S TAT I O N R A N G E E N T E R S TAT IO N N U M B E R
If HOLD is pressed without entering a station range, ALL stations are selected.