Voice Mail One-Touch Recording
2-271
Chapter 2 - Features and Operation
Conditions
»
If the user hangs up without terminating the record function, the system performs the
exit procedure as described in step 3 above.
»
If the user presses the TRANS, CAMP ON, MSG, or FWD buttons during recording, pressing
the button is ignored.
»
During the recording setup, pressing the CONF button is ignored.
»
If a VM port is
not
available
when the station user wants to record, the user receives the
following display (lasts six seconds):
(The user may retry after the display extinguishes.)
»
In the recording mode, pressing the CONF button lets the user add members to the
recording (conference). Normal conference operation/conditions apply.
»
If the FLASH or HOLD button is pressed during the recording, the recording is terminated.
»
If a station user presses the record button while in a two-party conference, it is recorded.
If the button is pressed a second time, the conference ends and the call is returned to a
two-way conversation.
»
Only one active recording per station is allowed.
»
If a conference is being recorded and the conference master exits, the recording stays
active. The recording stops if the initiator re-enters the conference and ends it, removes
the record function, or the conference ends on its own.
»
Only the initiator of a conference can invoke/remove the record function during a
conference.
»
A conference warning tone is not given to conference members, if the initiator is
recording the conference and record tone is disabled.
»
Recording is not allowed for a station that is barged in, Executive Overridden, or on an
active OHVO call.
»
An Unsupervised Conference Call can be recorded.
One-Touch Recording Warning Tone
Description
The One-Touch Recording Warning Tone feature lets the installer enable/disable the
One-Touch Recording Warning Tone on a system-wide basis.
R E C OR D I N G U N AVA IL AB L E
M M M D D Y Y
0 0 : 0 0 a m
Use of this feature when the One-Touch Recording Warn Tone is disabled may be
interpreted as a violation of federal, state, or local laws, and an invasion of privacy.
Check applicable laws in your area before recording calls using this feature.
Summary of Contents for Starplus Triad-S
