Vodavi Starplus Triad-S, Manual

Page: 109 / 512

CO Line - Ringing Options 2-83
Chapter 2 - Features and Operation
Programming Steps
1. Press the TRANSFER CO RING flexible button
(FLASH 07, Button #9)
. The following
message displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to Table 2-11 on page 2-130 .)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Transfer CO Ringing flash rate is set for a Red 120 ipm Flash (10).
Recall CO Ringing
Description
The Recall CO Ringing flash rate is the rate at which a CO Line button or Loop button flashes
when a call recalls to your station. This flash rate can be programmed to 29 different options
identified in the flash rate table. This enables the programmer to customize the key system
configuration to desired flash rates.
Programming Steps
1. Press the RECALL CO RING flexible button (FLASH 07, Button #10) . The following
message displays:
2. Enter a valid number on the dial pad to correspond to one of the 29 available options.
(Refer to Table 2-11 on page 2-130 .)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Recall CO Ringing flash rate is set for a Red 480 ipm Flutter (08).
T R A N S F E R CO R I N G 00-28
RE D 1 2 0 I PM F LA S H
R E C A LL CO R I N G 0 0-28
R E D 4 8 0 IP M F LU T T E R