Vodavi Starplus Triad-S, Manual

Page: 126 / 512

2-100 Dial Pulse Sending
Chapter 2 - Features and Operation
Programming Steps
1. Press
FLASH
and dial
[43]
. The following message displays:
000 = Route Number (000–251)
DDDD = 3- or 4-Digit Ringing Destination Number
R = Ringing Type
2. Press the RING ASSIGNMENT flexible button (FLASH 43, Button #1) . LED #1 is lit
indicating Route 000 is ready for programming.
3. Enter a valid Destination (DDD) or (DDDD) and Ring type (R) followed by HOLD. A
confirmation tone sounds and the display updates.
* Internal flexible numbers range = 100-8999
View ICLID Ringing Assignments
Description
Keysets designated to ring on an incoming CO line but not designated to ring on the ICLID
ring, may receive a ring cycle before the call is moved. The same ringing restrictions applied
to CO line ringing are applied to ICLID ringing.
Programming Steps
1. Press FLASH 43, Button #17 to display ring assignments. Assignments are displayed in
sets of five, up to the number programmed. Press FLASH 43, Button #17 additional
times to cycle to the next group of five ring assignments.
R OU T E 0 0 0 D DD D R
Table 2-5: DID/ICLID Ringing Assignments
Valid 3- and 4-Digit Destinations (DDD) and (DDDD) Valid Ring Types (R)
System Speed Bins [9020–9999], for Off-Net Ringing [0] = No Ring; unassigned; or to delete a station
Flexible Extension Numbers* [1] = Day Ring [D]
Flexible Numbers for Voice Mail Groups 1–8* [2] = Night Ring [N]
Flexible Numbers for Hunt Groups 1–8* [3] = Day/Night Ring [DN]
Flexible Numbers for Direct Ringing to Modem* [4] = Special Only [S]
Flexible Numbers for ACD Groups 1–16* [5] = Day/Special [DS]
Flexible Numbers for UCD Groups 1–8* [6] = Night/Special [NS]
Local Number/Name Translation Table Number [600-799] [7] = All Modes [Day/Night/Special [A]