Vodavi Starplus Triad-S, Manual

Page: 174 / 512

2-148 Hunt Groups
Chapter 2 - Features and Operation
Initialize Hunt Group Parameters
Description
Hunt Group Parameters may be initialized setting all data fields to their original, default
value.
Programming Steps
1. Press the HUNT GROUPS flexible button ( FLASH 80, Button #10 ). The following message
displays:
2. Press the HOLD button. A confirmation tone sounds.
Print Hunt Group Parameters
Description
The Print Hunt Group command dumps the entire database as a permanent record which can
serve as a hardcopy of the database. The system baud rate must match that of the printer or
receiving device.
Table 2-12: Hunt Group Defaults
Program
Code
Flexible
Button
Features
Default Value
(after initialization)
FLASH 30 HUNT GROUPS
1-12 Hunt Group Programming None
13 Station/Pilot Hunting Assignment Pilot
I N I T I AL I ZE H U N T G R O U P
P R E S S H O LD
HUNT GROUPS
-----------
HG 0..450 PILOT RING ONE
HG 1..451 PILOT RING ONE
HG 2..452 PILOT RING ONE
HG 3..453 PILOT RING ONE
HG 4..454 PILOT RING ONE
HG 5..455 PILOT RING ONE
HG 6..456 PILOT RING ONE
HG 7..457 PILOT RING ONE RAN HUNT GROUPS
---------------
HG 8..458 PILOT RING ONE
HG 9..459 PILOT RING ONE
HG10..460 PILOT RING ONE
HG11..461 PILOT RING ONE
Figure 2-10: Hunt Group Parameters Printout