Vodavi Starplus Triad-S, Manual

Page: 149 / 512

Executive Override 2-123
Chapter 2 - Features and Operation
4. Press the EXECUTIVE OVERRIDE flexible button
(Button #4)
. The following message
displays:
5. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
6. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Executive Override is disabled for all stations.
Operation
To use Executive Override, when calling a busy station:
1. Press the preprogrammed EXECUTIVE OVERRIDE button (The programming code is 625).
Executive station is bridged onto the CO line conversation in progress at the called
station. An optional warning tone is presented to all parties prior to cut-through.
2. Replace handset at Executive station to terminate the override.
Conditions
»
An error tone occurs when the called party:
- Is in a conference.
- Is already on an OHVO call.
- Has a Camp On at their station.
»
If Executive joins a call and one of the members does a hook-flash or presses their transfer
button, the Executive is dropped.
»
If Executive does a hook-flash or presses Transfer button, it is ignored.
»
When the Executive joins an intercom call or CO call and the Executive is not in a mute
state, and any member of the party hangs up, the call is converted to a two-party
conversation.
»
When the Executive joins an intercom call or CO call and the Executive is in the mute
state, and either of the two parties in the intercom call hang up, the call is dropped. If the
Executive hangs up, the call remains a two-party conversation.
»
Certain forwarding types affect override operation; except to override forwarding, dial
[5#] + extension number.
»
Intercom button disallows Executive Override.
E X E C O V E R R ID E 0-1
D IS AB L E D
Use of this feature when the Executive Override Warning Tone is disabled may
be interpreted as a violation of federal, state, or local laws, and an invasion of
privacy. Check applicable laws in your area before intruding on calls using this
feature.
A change in volume may occur on the CO line or intercom call after the barge-in
occurs.