Vodavi Starplus Triad-S, Manual

Page: 132 / 512

2-106 Direct Transfer Mode
Chapter 2 - Features and Operation
Direct Transfer Mode
Description
An outside CO line can be transferred from one keyset to another. By using the TRANS
button, a screened (announced) transfer can be transferred directly to the handset on any
key station. Any number of attempts can be made to locate someone by calling different
keysets without losing the call. If a line is transferred to a busy station, it receives muted
ringing.
When enabled, supervised transfers (screened transfers) to stations in the handset mode
connect calls directly to the handset. The station user must have a direct appearance of that
CO line or a Loop button. This feature is programmed on a system-wide basis in admin
programming.
Programming Steps
1. Press the DIRECT TRANSFER flexible button (FLASH 06, Button #7) . The following
message displays:
2. Enter a 0 or 1 on the dial pad to enable/disable this feature.
[0] = Disabled
[1] = Enabled
3. Press HOLD to save the entry. A confirmation tone sounds.
DEFAULT … Direct Transfer Mode is enabled.
Directory Dial
Description
Directory Dial enables display telephone station users to obtain a directory of station users
and have the system dial the extension currently displayed. The
Triad-S provides locations for
up to 200 names (000-199). Directory dial also lets users program a name with a speed dial
bin for use in later locating a speed dial number. When prompted, the system displays the
name associated with a speed dial number so when the desired name is shown, the user may
then have the system dial the number.
Directory Dial allows users to associate a name with an entry in the local number/name
translation table. When prompted, the system displays the name associated with the table so
when the desired name is shown, the user may then have the system dial the number.
D IR E C T X F E R 0-1
E N A B L E D