Vodavi Starplus Triad-S, Manual

Page: 49 / 512

Call Forward 2-23
Chapter 2 - Features and Operation
Call Coverage Ring Timer
Description
A Call Coverage Ring Timer enables the system administrator to set the amount of delay time
before the call coverage feature provides an indication at the coverage station. When that
station rings with an internal or external call, the DSS button for that station rings or flashes.
The call coverage ring timer is a system-wide setting.
The Call Coverage Ring Timer setting is variable from 00-99 seconds.
Programming Steps
1. Press the CALL CVRG RING TIMER flexible button (FLASH 02, Button #3). The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 00-99 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Call Coverage Ring Timer is set for 5 seconds.
Call Forward
Description
When any type of station call forwarding is invoked, the LCD display normally indicates the
call forwarding mode at all times. This feature has modified the LCD forwarding display to
make the call forwarding mode display optional. This feature is enabled/disabled in admin
programming on a system-wide basis. The call forward status is stored in a battery protected
area of memory.
Call Forwarding
Description
Stations can be allowed or denied the ability to forward all incoming CO calls, intercom calls,
and transferred outside lines to another station or group.
Use Flash 50 programming when you want to modify a range of stations’ attributes using
fixed station numbers.
Use Flash 51 programming to modify a single station’s attributes using a flexible station
number.
C A LL C OV E R AG E R I N G 00- 99
0 5