Vodavi Starplus Triad-S, Manual

Page: 402 / 512

B-14 Programming LCR Tables
Chapter - Least Cost Routing
LCR Routing for Toll Information
Description
The LCR Routing for Toll Information feature adds provisions to the LCR call processing which
allows common call routing for all toll information calls. 1-(XXX) 555-1212, (XXX) 555-1212,
1-555-1212, and 555-1212 calls are intercepted and sent to a selected route in the Route List
Table.
Numbers dialed are integrated and if it is determined to be a toll information call, either
preceded with an area code or without or with a leading digit 1 or not, the call is sent to the
route designated in programming.
By default, Toll Information Calls are sent to Route List Table Zero (0) which allows toll
information calls to be placed on the system at default. A Toll Information route is chosen
over a 3-digit or 6-digit route assignment if both are assigned. Entering the pound key twice
[##] denies all Toll Information Calls.
Programming Steps
1. Press the TOLL INFO flexible button (FLASH 75, Button #8) . The following message
displays:
2. Enter a valid Route List number (00–15) for the Route referenced in the Route List table.
3. Press the HOLD button after programming the Route number. A confirmation tone
sounds and the display updates.
4. Enable LCR at this point.
LCR Call Progress
Description
The LCR CALL PROGRESS Feature enables the installer to select, on a system-wide basis,
whether users hear call progress indications.
Programming Steps
1. Press the LCR CALL PROGRESS flexible button
(FLASH 06, Button #9)
. The following
message displays:
2. Enter a 0 or 1 on the dial pad to enable/disable the use of this feature.
[0] = Disabled
[1] = Enabled
LC R R O U T E F OR 5 5 5 - 1 2 1 2
E N T E R R OU T E
If this feature is disabled, a confirmation tone is given after the last digit is dialed.
The user does not hear the line being seized or the outpulsing of digits to the Central
Office.
LC R C AL L P R O G R E S S 0-1
E N AB LE D