Vodavi Starplus Triad-S, Manual

Page: 63 / 512

Call Forward - Preset 2-37
Chapter 2 - Features and Operation
Preset Forward Timer (Incoming Call to a Destination)
Description
The Preset Forward Timer determines the time an outside line rings before being forwarded
to a predetermined destination as programmed in FLASH 50, Page C, Buttons 1-4. If a forward
destination is programmed in the CO line field, the CO calls forward to that destination after
the CO preset forward timer expires. This forward occurs regardless of how many stations the
line is ringing.
This feature applies to initial CO ringing lines only and works with Preset Forward CO Line
assignments. The CO Line Preset Forward Timer setting is variable from 00-99 seconds. A [00]
entry disables the timer and the feature is disabled.
Programming Steps
1. Press
FLASH
and dial
[40]
. The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
3. Press Button #21 to select Page C. The display updates. The following message displays to
indicate current programming of that line or group of lines:
XXX-XXX = CO Line Range
4. Press the PRESET FWD TIMER flexible button
(FLASH 40, Page C, Button #5)
. The
following message displays:
5. Enter valid number on dial pad which corresponds to 00–99 seconds.
6. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … CO Line Preset Forward Timer is set at 10 seconds.
C O L I N E AT T R IB U T E S
S E LE C T A CO LI N E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.
XX X - X X X PAG E C
E N T E R B U T TO N N U M B E R
P R E S E T F W D T I M E R 00-99
1 0