Vodavi Starplus Triad-S, Manual

Page: 146 / 512

2-120 Do Not Disturb
Chapter 2 - Features and Operation
»
DND capability is programmable on a per-station basis.
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
One-Time Do Not Disturb
Description
Prevents calls from ringing at your station while you are on a call. The One-Time DND
condition automatically cancels when you end your call.
Stations can be individually allowed or denied the ability to place their telephone in Do Not
Disturb. Attendants cannot utilize DND.
Operation
To activate One-time Do Not Disturb:
Press the preprogrammed DND button while you are off-hook and connected to a CO line or
intercom call. The DND button LED lights and off-hook tones at your station cancel.
To cancel One-time Do Not Disturb:
Replace handset. The DND button LED extinguishes and DND cancels.
Do Not Disturb Button Flash Rate
Description
The Do Not Disturb Button flash rate is the rate at which your Do Not Disturb button flashes
when you place your station in a Do Not Disturb mode. This flash rate can be programmed to
29 different options identified in the flash rate table. This enables the programmer to
customize the key system configuration to desired flash rates.
Programming Steps
1. Press the DND BTN flexible button (FLASH 07, Button #18) . The following message
displays:
2. Enter a valid number (00-28) on the dial pad to correspond to one of the 29 available
options. (Refer to Table 2-11 on page 2-130 .)
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Do Not Disturb Button flash rate is set for Red Steady On (01).
D N D B T N 00- 28
R E D S T E A DY O N