Vodavi Starplus Triad-S, Manual

Page: 125 / 512

Dial Pulse Sending 2-99
Chapter 2 - Features and Operation
Programming Steps
1. Press the PULSE DIAL I/D TIMER flexible button
(FLASH 02, Button #5)
. The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 300-600 ms.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Pulse Dial Ring Timer is set for 300 ms.
Pulse-to-Tone Switchover
Description
When commanded, the system changes the signaling on an outside line from dial pulse to
DTMF (tone), allowing the use of common carriers behind a dial pulse outside line. This can
be done manually when dialing, or can be stored within a speed dial number.
Operation
To perform the change-over:
Dial [
✳
] on the dial pad. The remaining digit(s) is sent using DTMF.
(The Pulse-To-Tone Switchover command may also be included in a speed dial bin.)
ICLID Ringing Assignments
Description
ICLID Ringing Assignments let you change the ring assignment based on the incoming
number received. This feature permits you to select from 252 ringing routes for each entry in
the name to number translation table. For example, this feature could be used to reroute
selected customers to a specific ACD or UCD group and bypass the general Attendant.
I N T D I G IT PU L S E 300 -6 00
3 0 0
RINGING
ASSIGNMENTS
✺
1 Q
✺
2 W
✺
3 E
✺
4 R
✺
5 T
✺
6 Y
✺
7 U
✺
8 I
✺
9 O
✺
10 P
✺
11 A
✺
12 S
✺
13 D
✺
14 F
✺
15 G
✺
16 H
DISPLAY RINGING
ASSIGNMENTS
NEXT ROUTE
NUMBER
PREVIOUS ROUTE
NUMBER
SELECT ROUTE
NUMBER
✺
17 J
✺
18 K
✺
19 L
✺
20 ;
✺
21 Z
✺
22 X
✺
23 C
✺
24 V