2-40
Call Park
Chapter 2 - Features and Operation
»
A CO call parked in a system call park location recalls to the station that parked the call,
when the call park recall timer expires. The CO call rings to this station until the system
hold timer expires. The CO call then recalls the Attendant (both the Attendant and
initiating stations are ringing), and the Attendant recall timer is initiated. When the
Attendant recall timer expires, the CO call is disconnected.
Call Park Recall Timer
Description
The Call Park Recall Timer determines the time before a call placed in a Call Park location
recalls the station placing the call in park. If unanswered by that station, the call recalls the
attendant.
The Call Park Recall Timer setting is variable from 000–600 seconds. A 000 entry disables the
timer and there is no recall.
Programming Steps
1. Press the CALL PARK RECALL TIMER flexible button
(FLASH 01, Button #8)
. The following
message displays:
2. Enter a valid number on the dial pad that corresponds to 001-600 seconds.
3. Press HOLD to save the entry. A confirmation tone sounds and the display updates.
DEFAULT … Call Park Recall Timer is set at 180 seconds.
Call Park - Personal
Description
Each telephone in the system can place a call into a personal park location and then later
retrieve that call from the originating station. Intercom calls and CO line calls can be placed
into the stations’ personal park location. Calls parked in a personal park location are subject
to the system call park recall timer (refer to
“Call Park Recall Timer” on page 2-40
. A station
retrieving a personal parked CO call must have either a direct CO line appearance or an
available loop button to retrieve the parked call.
C A LL PA R K T IM E R
000 -6 00
18 0
Only one call can be parked in a Personal Call Park location at one time. When
dialing the Personal Park location and the location is already occupied, the
initiating station receives the previously parked call and the second call is then
parked.
Summary of Contents for Starplus Triad-S
