Vodavi Starplus Triad-S, Manual

Page: 61 / 512

Call Forward - Preset 2-35
Chapter 2 - Features and Operation
External Busy Destination
1. Press Button #4 . The following message displays:
2. Enter a valid flexible number and press HOLD.
3. To delete the entry, press the [#] key and then press HOLD.
No Answer Timer
1. Press Button #5 . The following message displays:
2. Enter a valid number (00-99) and press HOLD (00=disable).
DEFAULT … No Answer Timer is set at 10 seconds.
Conditions
»
Station Forwarding overrides the Preset Forward settings.
»
Only one station at a time can be programmed when using a flexible station number.
»
When in Flash 51 programming, if you press HOLD without specifying a flexible number
to be programmed, you will get the station that is in port/station 100.
Preset Call Forward - CO Line
Description
The Preset Call Forward Destination feature enables a CO line to initially ring at multiple
stations and forward to a pre-determined destination. The destination can be a station
(EKT-SLT), Voice Mailbox, ACD/UCD group, or Hunt group. Each CO line has a Preset Forward
Timer. Each CO line also has a VMID field to allow sending of specific VM digits when a CO line
forwards to a VM group. Calls ringing into ACD/UCD Groups or Voice Mail Groups continue to
ring the group. The CO line does not forward when ringing one of these types of groups.
Programming Steps
1. Press FLASH and dial [40] . The following message displays:
2. Enter a valid number for the range of lines being programmed. If only one line is being
programmed, enter that number twice (001 001).
E X T E R N A L B U S Y F W D
# # # #
N O A N S W E R T I M E R 00- 99
1 0
C O L I N E AT T R IB U T E S
S E L E C T A C O L I N E R A N G E
If HOLD is pressed without entering a CO range, ALL CO lines are selected.