Vodavi Starplus Triad-S, Manual

Page: 178 / 512

2-152 Intercom
Chapter 2 - Features and Operation
To answer an Intercom Call:
In the T mode , you hear repeated bursts of intercom tone ringing and the HOLD button
slow flashes.
Lift the handset or press the ON/OFF button to answer,
-or-
Press the H-T-P button to the H mode to reply.
In the P mode , you hear three bursts of tone and one-way announcement. The calling
party cannot hear conversations in progress.
Lift the handset or press the ON/OFF button to answer,
-or-
Press the H-T-P button to the H mode to reply.
In the H mode , you hear three bursts of tone and an announcement.
Reply handsfree or lift the handset for privacy.
SINGLE LINE TELEPHONE
To place an intercom call:
1. Lift the handset.
2. Dial the intercom number.
You will hear ringing if the called station is in the “T” answering mode or two bursts of
tone if the called station is in the “H” or “P” positions.
3. Hang up to end the call.
To answer an intercom call:
Lift the handset,
-or-
If your SLT is equipped with a speakerphone, press the Speaker button to converse in a
handsfree mode.
Incoming Intercom Ringing Flash Rate
Description
The Incoming Intercom Ringing flash rate is the rate an Incoming DSS button flashes if you
have a DSS appearance for the calling station. This flash rate can be programmed to 29
different options identified in the flash rate table. This enables the programmer to customize
the key system configuration to desired flash rates.
Programming Steps
1. Press the INC ICM RING flexible button (FLASH 07, Button #2) . The following message
displays:
IN C I C M R IN G 00-28
RE D 1 2 0 I PM F LU T T E R