Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 110 / 578

59 38 399 D3352
2 – 52
D3352.076.01.13.02 07.2008
2.5 List of error messages Tab 2
E6 81 20 PAN
The sensor type on the panoramic unit
is not compatible with SIDEXIS speci-
fications
z
Check with the Sirona Customer Service Cen-
ter (CSC) for SIDEXIS specifications
z
Check version compatibility of XG software and
Sidexis,
1-16
perform a software update if necessary
1-22
z
Pull sensor out of slot and plug it back in, repeat
procedure
E7 81 21 PAN
File system error on DX81P
z
Perform a software update
1-22
z
Check sensor or board DX81 (replacement sen-
sor), replace sensor if necessary
E6 81 23 PAN
Sensor in pan slot active on CAN bus,
but no hardware detection
z
Check cable L13, replace if necessary
3-17
6-91
z
Check Pan LED (V500) on DX1
(hardware detection of sensor)
3-12
z
Check sensor or board DX81 (replacement sen-
sor), replace sensor if necessary
z
Check connector X500 on DX1,
replace DX1 or DX11 if necessary
6-59
z
Replace board DX1 or DX11
6-59
E5 81 24 PAN
Sensor in PAN slot not detected.
z
Check cable L13,
replace if necessary
3-17
6-91
z
Check Pan LED (V500) on DX1
(hardware detection of sensor)
3-12
z
Check sensor or board DX81 (replacement sen-
sor), replace sensor if necessary
z
Check plug X500 on DX1,
replace DX1 if necessary
6-59
z
Checking the CAN bus
3-6
E5 81 25 PAN
Error while synchronizing image data
z
Perform a software update
6-59
If the error occurs again...
z
Check pan sensor, replace if necessary
E5 81 27 PAN
Voltage error detected on sensor.
(CCD voltages on board DX81P)
Note:
If this error occurs in connection with
other causal error messages (e.g. E6
6160, E6 9150), take appropriate
action
z
Check cable L13,
3-17
replace if necessary
6-91
z
Check plug X500 on DX1,
replace DX1 if necessary
6-59
z
Check pan sensor, replace if necessary
Error code Description Actions required see page