Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 33 / 578

1.9
båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
1 – 25
Tab 1 1.9 Software update
1.9
Selecting an installation source 4.
IMAGE FILE
is preset as the installation source for the software update.
5. Select the path and the desired update file and confirm your selection by
clicking
OPEN
.
Click on
NAME UPDATE
and
OPEN
.
NOTE
i
The update file can be found on the ORTHOPHOS XG Software CD. It is de-
livered with each DX11 replacement board and also included in the country
set. The contents of the CD can be downloaded from the Dealer domain of the
SIRONA Internet home page (under Product Info
‡
X-ray Systems):
www.sirona.com
Selecting the update mode 6. Select the mode for the software update.
You can select two different update modes via the index tabs:
z
Automatic
The software of all components is automatically updated to a higher soft-
ware version .
z
Main version
The software can be upgraded or downgraded to the desired version .
This update mode is required e.g. if a replacement component delivered
out of stock has a newer status than the prevailing overall system status.
In this case, a main version update to the overall system status (displayed
on the info screen) must be performed for the corresponding component
with the appropriate update file (*.SUI). The module is then repro-
grammed.
(For more information on the update mode, see the next page.)
4. 5.