Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 288 / 578

59 38 399 D3352
5 – 20
D3352.076.01.13.02 07.2008
5.3 Service routines with SIDEXIS Tabs 5
7. Select/confirm the
SERVICE EXPOSURE
.
The following service exposures are available for selection:
DIGITAL TEST PATTERN
: Checks the data transmission
path between PC and sensor
FACTORY SERVICE
: Sets interlock signal for
service programs (only for D3297)
DIAPHRAGM TEST EXPOSURE
:
Check of pan and
ceph adjustments
DIAPHRAGM
/
SYSTEM ADJUSTMENT
: Adjustment
QUALITY TEST EXPOSURE
: Test exposure not stored in
PDATA
If several different X-ray components are available, a dialog box for select-
ing the X-ray device appears on the screen. In this case, select/confirm
the required component.
If only one X-ray component is available, the exposure readiness dialog
box appears on the screen and shows the status of the exposure.
NOTE
i
During operation in the service mode, the unit switches from the user mode to
the PC service mode logged by the PC (see section 4.2).
When you select the
DIAPHRAGM
/
SYSTEM ADJUSTMENT
menu...
the dialog box for entering the service password appears on the screen.
z
Enter the service password and confirm your input by clicking
OK
.
NOTE
i
As servicepassword, enter the first 4 digits of the current system date in re-
verse order (e.g. on 05/24/1995, 5042 must be entered as the service
password).