Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 495 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
6 – 63
Tab 6 6.20 Replacing circuit boards
6.20
* circuit board DX41 no longer applies in system hardware version BA.
Circuit board DX41 is available as a spare part for systems up to hardware version AG.
DX71
(Multipad)
z
Inserting a new DX71
z
Check the compatibility between the
software status of the modules and
that of the overall system. Perform
an update or a downgrade if neces-
sary.
1-24
DX32
(Stand)
z
Inserting a new DX32
z
No further action is required.
DX41*
(Stand)
z
Inserting a new DX41
z
Check the compatibility between the
software status of the modules and
that of the overall system. Perform
an update or a downgrade if neces-
sary.
1-24
DX42
(Remote control)
z
Inserting a new DX42
z
Check the compatibility between the
software status of the modules and
that of the overall system. Perform
an update or a downgrade if neces-
sary.
1-24
z
To system hardware version
<
BA:
Set jumper X109 and X110 to "Con-
figuration with DX41“ (inside jumper)
(see also Section 6.20.4).
6-90
DX81
(Sensor)
z
Using a new sensor
z
Perform an update to an overall soft-
ware version of V02.25 or higher.
1-24
DX91
(Ceph)
z
Inserting a new DX91
z
Check the compatibility between the
software status of the module and
that of the overall system. Perform
an update or a downgrade if neces-
sary.
1-24
z
Perform service routine S034, test
steps 4 and 5.
5-134
z
Perform the ceph adjustment.
4-56
Board Constellation Measures Page