Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 298 / 578

59 38 399 D3352
5 – 30
D3352.076.01.13.02 07.2008
5.6 Service routine S005 Tabs 5
S005.2: Automatic adjustment of preheating
Performing the compensation 3. Start the automatic compensation by pressing the release button.
CAUTION
The tube assembly must be at operating temperature before the
compensation. To do this, release radiation once for 14.0 s at kV/mA
level 60/9 via service routine S001 (see page 5-21).
NOTE
i
Keep pressing the release button until compensation is completed and the
new offset value for preheating is displayed. During the compensation proce-
dure, a progress indicator is displayed in selection field 1.
NOTE
i
If you interrupt the compensation procedure prematurely by letting go of the
release button, the message EEEE appears in selection field 2. This message
must be acknowledged with the
R key .
Quitting the service routine XG
Plus
:
To return to the service routine selection menu, press the Service key or
the double arrow key .
To quit the Service menu and return to the main menu, press the
double arrow key .
For XG 5 / 3 / 3 PPE:
To return to the service routine selection menu, press the up arrow key
above selection field 3.
To quit the Service menu and return to the Main menu, press the
up arrow key above selection field 3.
1
2
3
2 mV(VH)
n
(
1 2 3
XG
Plus
:
Easypad touchscreen XG 5 / 3 / 3 PPE : Multipad
S5
2
E
X RAY Active!
__________2____