Sirona ORTHOPHOS XG 3 DS, Service Manual, Page: 90 / 578

59 38 399 D3352
2 – 32
D3352.076.01.13.02 07.2008
2.5 List of error messages Tab 2
E6 14 10
E6 14 11
E6 14 12
Clock signals for sensor image trans-
fer not received on board DX1/DX11
(...10).
Faulty detection of sensor image
transfer data signals on board DX1/
DX11; nonrecurring (...11)
Faulty detection of sensor image
transfer data signals on board DX1/
DX11; recurring (...12)
z
Acknowledge error and, if possible, check func-
tion at another slot (PAN/CEPH) via test image
(PAN/CEPH).
3-25
If both test images indicate the error
...
- Check image signal on board DX1
(does the image LED on DX1 switch on
when the ring cycle starts in the test im-
age mode?), replace DX1 if necessary
5-128
6-59
If only the PAN test image
is not OK...
- Check cable L13 for crushed spots and
check for kinks and connectors, repair or
replace if necessary
- Check board DX1, replace if necessary
- Perform service routine S032.10.
In this way it can be determined whether
the fault is stationary or permanent; re-
place sensor or cable if necessary.
6-91
6-59
5-126
6-91
If only the CEPH test image
is not OK...
For E06 14 10 and Ceph exposure:
- Check board DX91 and cables (L37,
L40), replace if necessary
- Perform service routine S033.10.
In this way it can be determined whether
the fault is stationary or permanent; re-
place sensor or cable if necessary.
Otherwise:
- Check cable L35/L38 for crushed spots
and
check for kinks and connectors,
repair or replace if necessary
- Check board DX1, replace if necessary
- Perform service routine S033.10.
In this way it can be determined whether
the fault is stationary or permanent; re-
place sensor or cable if necessary.
3-17
6-91
5-130
6-91
3-17
6-91
6-59
5-130
6-91
Error code Description Actions required see page