Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 38 / 578

59 38 399 D3352
1 – 30
D3352.076.01.13.02 07.2008
1.9 Software update Tab 1
1.9.5 Software Update for ORTHOPHOS XG
Plus
from V02.20 to V02.30 or higher
NOTE
i
If the sensors previously used are to be used in the future as well, plug them
into the slots on the panoramic unit and/or cephalometer before you begin the
update.
1. Switch the unit ON.
2. Execute the software update to Version V02.25 or higher (automatic up-
date) as described on page 1-24.
3. Switch the unit OFF.
Wait for approx. 1 minute. Then switch the unit ON again.
Error message E6 15 04 (undefined activation data) is displayed.
4. Acknowledge the error message with the R key .
5. Open the Service menu (see page 5-10).
6. Start service routine S008.3 and confirm the unit serial number (see page
5-50).
NOTE
i
The unit serial number is located on the rating plate of the unit.
CAUTION
In case of a wrong serial number, cancel the update and contact the SIRONA
Customer Service Center!
7. Start service routine S008.3 and enable the function activation. Exit the
Service menu again.
8. Switch the unit OFF.
Wait for approx. 1 minute. Then switch the unit ON again.
9. Perform the complete system adjustment (see chapter ):
– PAN adjustment
– For TSA units: TSA adjustment
– CEPH adjustment if cephalometer is installed
z
The process is completed.
E6 15 04
(
R
R