![background image](http://html1.mh-extra.com/html/sirona/orthophos-xg-3-ds/orthophos-xg-3-ds_service-manual_1285016464.webp)
59 38 399 D3352
6 – 32
D3352.076.01.13.02
07.2008
6.10 Removing the light localizers from the ring (for the XG
Plus
and XG 5, if present)
Tabs 6
6.10
Removing the light localizers from the ring
(for the XG
Plus
and XG 5, if present)
In XG
Plus
and XG 5 units with an older serial number, a light localizer is
located on the left and on the right bottom side of the ring. Both of these light
localizers must be removed for TSA operation. To do this, proceed as follows:
1.
Unplug the cables of the light localizers from connectors X405 and X406
on board DX61 and detach the cables from the cable clamps.
2.
Unscrew the holders including the light localizers from the ring.
NOTE
i
Depending on the serial number of the unit, different versions of light localizers
may be installed.
CAUTION
For "TSA ready" units, make sure that cable L20 (TSA motor) and cables L21
(light barriers) are once again correctly installed in the cable clamps (see page
6-45). Tighten the cables slightly if necessary.
X406 X405
Light localizer
Summary of Contents for ORTHOPHOS XG 3 DS
