Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 83 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
2 – 25
Tab 2 2.5 List of error messages
2.5
E5 13 31 Unit has traveled to upper limit switch
z
Check max. travel height with service routine
S018.2, adjust if necessary
z
Run HA motor in the other direction with the UP/
DOWN keys and reference (value approx.
1500)
5-110
z
Check light barriers V1_4
3-15
replace if necessary
6-49
z
Check HA motor for overtravel,
replace DX1 if necessary
6-59
If the error occurs again...
z
check the limit switch or wiring,
correct or replace the limit switch if necessary
E5 13 32 Unit has traveled to lower limit switch
z
Run HA motor in the other direction with the UP/
DOWN keys and reference (value approx.
1500)
5-110
z
Check light barriers V1_4
3-15
replace if necessary
6-49
z
Check HA motor for overtravel,
replace DX1 if necessary
6-59
If the error occurs again...
z
check the limit switch or wiring,
correct or replace the limit switch if necessary
E5 13 33 Height adjustment motor position
counter too small for current position
Note:
Error may occur after replacement of
board (DX11)
z
Run HA motor in the other direction with the UP/
DOWN keys and reference (value approx.
1500)
z
Check max. travel height using service routine
S018.2, adjust if necessary
5-110
z
Check light barriers V1_4,
3-15
replace if necessary
6-49
E5 13 34 Height adjustment motor position
counter too large for current position
Note:
Error may occur after replacement of
board (DX11)
z
Run HA motor in the other direction with the UP/
DOWN keys on the Easypad (XG
Plus
) or the
Multipad (XG5/3/3 PPE) and reference (value
approx. 1500)
z
Check light barriers V1_4,
3-15
replace if necessary
6-49
HINWEIS
i
As an aid, the current switching state can be queried
via service routine S018.4.
5-113
E5 13 35 Height adjustment motor;
wrong direction of rotation
z
Check connector assignment on filter or in front
of HA motor,
correct if necessary
z
Replace board DX1
6-59
Error code Description Actions required see page