Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 104 / 578

59 38 399 D3352
2 – 46
D3352.076.01.13.02 07.2008
2.5 List of error messages Tab 2
*) TTP = Time Trigger Protocol
E1 61 60 Voltage error on DX61,
40 V or 28 V
Note:
If several drives are operated simulta-
neously under unfavorable circum-
stances, this may cause voltages to
fall below their minimum tolerances.
z
Acknowledge error and repeat procedure
If the error occurs again...
z
Check height adjustment (soft start),
replace DX1 if necessary
6-59
z
Check voltages at X501 on board DX61 accord-
ing to wiring diagrams,
replace diaphragm unit if necessary
6-34
z
Check cable L11,
3-17
replace if necessary
6-91
z
Check voltage path from DX32 to DX1 (X102)
according to wiring diagrams,
replace component if necessary
E6 61 70 Error during the configuration of the
diaphragm unit If this error occurs after board DX11 has been
replaced:
z
Check configuration of diaphragm unit via
service routine S017.17
5-103,
5-105
Configure correctly if necessary
5-103,
5-105
If this error occurs after the diaphragm unit has
been replaced:
z
Check order number of inserted diaphragm unit
Replace diaphragm unit if necessary
6-34,
6-38
Error code Description Actions required see page