Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 75 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
2 – 17
Tab 2 2.5 List of error messages
2.5
Location 11: Power PC, board DX11
Error code Description Actions required see page
E6 11 01 Program sequence error
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and
perform such an update if necessary.
1-22
z
Acknowledge error and repeat procedure
If the error occurs again...
z
Reset the entire unit adjustment (Pan, Ceph,
TSA) and readjust the unit
4-3
z
Replace board DX11
6-59
E6 11 02 Watchdog error
z
Acknowledge error and repeat procedure
If the error occurs again...
z
Replace board DX11
6-59
E6 11 03 Operating system/resource error
z
Acknowledge error and repeat procedure
If the error occurs again...
z
Replace board DX11
6-59
E7 11 04 Implausible data in EEPROM
z
Check the device configuration via service rou-
tines S017 and S018 and reconfigure if neces-
sary
5-77, 5-109
z
Check adjustment with diaphragm test expo-
sures
7-17
If the adjustment is not OK...
z
Readjust the unit
4-3
If the adjustment is OK...
z
perform the individual system settings again
(e.g. programming of the patient symbol keys;
see operating instructions)
E6 11 05 RAM allocation failed
z
Replace board DX11
6-59
E7 11 07 Unknown or invalid definition of system
class
Note:
Occurs during first power-on after
replacement of board DX6 or DX11.
z
Perform actions required according to Chapter
"Replacing circuit boards".
6-59
E7 11 08 The user interface connected to this
unit does is not compliant with the
unit's system class configuration
z
Install the user interface compliant with the
system class configuration of this unit
6-21
E5 11 09 Internal error in program flow of board
DX11
z
Acknowledge error
If the error occurs again...
z
Perform a software update (bug fix)
1-22