Sirona ORTHOPHOS XG 3 DS, Service Manual, Page: 30 / 578

59 38 399 D3352
1 – 22
D3352.076.01.13.02 07.2008
1.9 Software update Tab 1
1.9
Software update
1.9.1 Important information on the software update
NOTE
i
Read the information provided on the ORTHOPHOS XG Software CD and
on the SIRONA dealer page on the internet very carefully. It always con-
tains the latest information on the software update.
NOTE
i
Before performing a software update, it is essential to read the program-ver-
sion-specific information in sections 1.9.4 to 1.9.6.
CAUTION
Important for TSA operation:
For downgrading from a software version
≥
V2.20 to one < V2.20 with the TSA
mode activated, the TSA sensor holder must be equipped with the transport
safety device and set to the PAN position!
CAUTION
Important for XG
Plus
units with serial numbers
21007 (without Ceph) or 41001 (with Ceph):
A downgrade to a software version V02.25 must not be performed on these
units in any case. Such a downgrade would result in permanent and
irreparable failure of the user interface!
CAUTION
Important for units with the following serial numbers or higher:
A downgrade to a software version < V02.32 cannot be performed on these
units.
ohne Ceph mit Ceph
XG 3 PPE 104000 –
XG 3 104000 –
XG 5 63500 83500
XG
Plus
23500 43500