Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 345 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
5 – 77
Tab 5 5.13 Service routine S017
5.13
S017: Configuration service
5.13
Service routine S017
Configuration service
z
Select the Service menu (see page 5-10).
Function S017 System configuration
Test step 2 Configuring the hardware version Security access
Test step 3 Entering the country group code Security access
Test step 4
(XG
Plus
only)
Selecting a language index within the language set Security access
Test step 5
(XG
Plus
only)
Selecting a language set index within the language set Security access
Test step 6 Activating the remote control display Security access
Test step 8 Selecting the kVmA level series Security access
Test step 9 Configuring operaton without board DX41 Security access
Test step 10 Configuring the headrest Security access
Test step 11 Selecting the image format Security access
Test step 12
(XG
Plus
only)
Enabling/disabling the preview image Security access
Test step 13
(XG
Plus
only)
Enabling/disabling the welcome screen Security access
Test step 14
(XG
Plus
only)
Enabling/disabling certain lines of the welcome screen Security access
Test step 15 Activating/deactivating the acoustic signal for end of exposure Security access
Test step 17 Setting the standard acceptance/constancy test, RöV FRG Security access
Checking or accepting the diaphragm configuration, worldwide
Test step 18 In preparation.
Caution! This routine must not be activated, since it will cause
malfunctioning of the unit.
Security access
Test step 22
(XG 3 PPE only) Deactivating/activating the PPE display after each unit power-up Security access
Test step 23
(XG 3 PPE only) Defining the PPE display warning level after each exposure Security access