Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 92 / 578

59 38 399 D3352
2 – 34
D3352.076.01.13.02 07.2008
2.5 List of error messages Tab 2
Location 41: Media interface card Board DX41 is omitted as of unit hardware version BA
(see page 1-34).
E6 15 10 Update file for module is corrupt
z
Obtain current update file from the Sirona CSC
and perform software update via the SIRONA
home page
1-22
Error code Description Actions required see page
E6 41 01 General module initialization error
z
If the error is a software error known to the Siro-
na Customer Service Center, a software update
(bugfix) must be performed
1-22
z
Replace board DX41
6-59
E6 41 02 Invalid system data or uninitialized
module storage data
z
If the error is a software error known to the Siro-
na Customer Service Center, a software update
(bugfix) must be performed
1-22
z
Acknowledge error and repeat procedure
If the error occurs again...
z
Replace board DX41
6-59
E6 41 03 Invalid commanding or control data
Note:
This error may also occur in connec-
tion with other causal error messages.
Please also observe the causal error
message! It appears only after you
acknowledge the first error message.
z
Checking the CAN bus
3-6
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and per-
form such an update if necessary.
1-22
E6 41 04
Data transfer error or dialog error to
module (master side)
z
Checking the CAN bus
3-6
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and per-
form such an update if necessary.
1-22
E6 41 05 Data transfer error or dialog error to
bootloader of module
Note:
Occurs only in connection with
software update
z
Repeat software update
1-22
z
Checking the CAN bus
3-6
z
Replace board DX41
6-59
E6 41 06 Module failed in TTP*
(detected on master side)
Note:
This error may also occur in connec-
tion with other causal error messages.
Please also observe the causal error
message! It appears only after you
acknowledge the first error message.
z
Checking the CAN bus
3-6
z
Replace board DX41
6-59
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and per-
form such an update if necessary.
1-22