Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 212 / 578

59 38 399 D3352
4 – 60
D3352.076.01.13.02 07.2008
4.4 Adjusting the cephalometer (XG
Plus
/ XG 5, if ceph is installed) Tabs 4
XG
Plus
: Display on the Easypad The Easypad touchscreen shows service routine S010.3
as well as the related exposure parameters.
XG 5: Display on the Multipad The single-line display of the Multipad shows the exposure parameters
of service routine
S010.3 .
Starting the exposure 3. Take an exposure (64 kV/16 mA; 6.1 s):
– Press the R key to move the unit back to the starting position.
XG
Plus
:
The procedure is completed when the status message “ORTHOPHOS is
ready for exposure“ appears on the touchscreen and the exposure
parameters of service routine
S010.3 are displayed.
XG5:
The procedure is completed when the exposure parameters of service
routine
S010.3 are displayed and the progress indicator disappears.
– Press the release button. Hold down the release button until image ac-
quisition is completed and the preview image appears in the exposure
dialog box.
1
2
3
+
-
64 kV/16 mA
6.1 s
S10
3
1 2 3
64/16____6.1____
R
WAIT
!
UNTIL UNIT IS IN STARTING POSITION