Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 41 / 578

1.10
båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
1 – 33
Tab 1 1.10 Selecting More details
1.10
NOTE
i
You can scroll down further in the file using the scroll bar. The "Changed
system parameters", i.e. the system parameters that were modified in relation
to the factory setting, are displayed there. This is especially interesting after a
module change. The parameter settings can thus be easily traced.
1951C59C.txt
--------------------------------------------------------------------------
--------------------- Changed Systemparameter ---------------------
--------------------------------------------------------------------------
The following systemparameters have been changed compared to the factory
settings.
After replacing an DX11-PCB, the listed values must be reconfigured.
--- Changed System Configuration Settings ---
Setting of system version (configured in S17.2)
actual value: 0x0043
Setting of head rest type (configured in S17.10)
actual value: 1
Setting of language index (configured in S17.4)
actual value: 0x0001
Setting of language-set index (configured in S17.5)
actual value: 0x0002
Setting of remote control activation (configured in S17.6)
actual value: active (01)
Setting of DX41 configuration (configured in S17.9)
actual value: mounted (01)
Setting of image format (configured in S17.11)
actual value: enabled (01)
Settings of welcome-screen configuration (configured in S17.14)
actual value: 01=1, 02=1, 03=1, 04=1, 05=0, 06=0, 07=0, 08=0
Settings of CEPH-adjustment (Stored by the adjustment-routines)
actual value: DAlpha = 2810 | DX = 0 | DY = 35160
Settings of CEPH-adjustment QuickShot (Stored by the adjustment-routines)
actual value: DAlpha = 2810 | DX = 0 | DY = 35160
Settings of PAN- and TSA-adjustment (Stored by the adjustment-routines)
actual value: DAlpha = -202 | DX = -191 | DY = -6044 | A1 = 0 | A2 = 0 | C1 =
-77
Setting of ring type (configured in S34.7)
actual value: 100
Setting of kVmA level series (configured in S17.8)
actual value: FIFO_2A
Settings of network configuration
actual value: IP: 192.168.15.176 | Subnet: 255.255.255.0 | Gateway:
192.168.15.1
--- Changed User Preference Settings ---
Settings of patientensymbols PAN (configured in 'select basic settings')
Settings of patientensymbols CEPH (configured in 'select basic settings')
Setting of anomaly default (configured in 'select starting settings')
Setting of default patientsymbol PAN (configured in 'select starting settings')
Setting of default patientsymbol CEPH (configured in 'select starting settings')