Sirona ORTHOPHOS XG 3 DS, Service Manual, Page: 87 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
2 – 29
Tab 2 2.5 List of error messages
2.5
E5 13 62 Temple supports; have left home posi-
tion without detected movement
pulses
z
Check light barriers V5_1 to V5_4,
3-15
replace headrest or
6-19
light barrier if necessary
6-49
z
Check cable L18,
3-17
replace if necessary
6-91
z
Check board DX5,
3-12
replace if necessary
6-59
E5 13 63 Temple supports; system does not
block within setting range
z
Check headrest mechanics, replace if neces-
sary
6-19
E6 13 64 Temple supports are not ready for
operation This error is a sequential fault.
z
Unit restart:
Switch the unit OFF. Wait 30 sec.
Switch unit ON.
z
Repeat procedure and observe causal error
messages.
E6 13 67 Error when activating temple support
motor
z
Unit restart:
Switch the unit OFF. Wait 30 sec.
Switch unit ON and check functioning.
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and per-
form such an update if necessary.
1-22
z
Check headrest mechanics,
replace if necessary
6-19
z
Replace board DX1
6-59
E6 13 68
Error when activating temple support
motor
Timeout of FPGA* module on board
DX1.
z
Acknowledge error
If the error occurs again...
z
Replace board DX1
6-59
z
Replace board DX11
6-59
E4 13 69 Forehead support drive defective
z
Replace the headrest
6-19
E5 13 73 Malfunction of height adjustment
during operation
z
Acknowledge error
z
Unit restart:
Switch the unit OFF. Wait 30 sec.
Switch unit ON and check functioning.
z
Please contact the Sirona Customer Service
Center (CSC) to find out whether a bugfix by
means of a software update is possible and per-
form such an update if necessary.
1-22
If the error occurs repeatedly...
z
Replace board DX1
6-59
Error code Description Actions required see page