Sirona ORTHOPHOS XG 3 DS, Service Manual, Page: 66 / 578

59 38 399 D3352
2 – 8
D3352.076.01.13.02 07.2008
2.4 Error messages Tab 2
2.4.2 Ex yy zz
Identifier yy defines the location or logical function unit where the error has
occurred.
The location may be a DX module number standing for an entire HW function
unit, or a logical SW function unit on board DX11 (central control).
2.4.3 Ex yy zz
Identifier zz constitutes a consecutive number with the
error identification.
2.4.4 General handling of error messages
Error messages always must be acknowledged with the R key .
If failure-free operation is possible after the error is acknowledged, then no
further action is necessary.
If error messages reoccur or occur frequently, identify the error as described
in section 2.5 and take appropriate action to eliminate the corresponding error
or fault.
In some cases, it may make sense to obtain more information on the history
and frequency of errors via the error logging memory (S007) and
SIXAB
-
CON
‡
PROPERTIES
‡
EXTENDED DETAILS
(see section 1.10 on page 1-32)
(see also section 3.1).
yy Location/Function unit Board
06 Tube assembly DX6
61 Diaphragm control (not for XG 3/3 PPE, fixed diaphragm) DX61
07 User interface on the Easypad (XG
Plus
) DX7
71 User interface on the Multipad (XG5/3/3 PPE) DX71
10 System hardware DX11/DX1
11 System software DX11/DX1
12 CAN bus DX11/DX1
13 Stand peripherals DX11/DX1
14 Digital extension DX11/DX1
15 Configuration/update (wrong software, wrong module constellation, etc...) DX11/DX1
41 Media interface card (omitted as of HW version BA, November 2006) DX41
42 Remote control DX42
81 Sensor (Pan slot: zz=1-23 ; ceph slot: zz= 51-73) DX81
91 Cephalometer DX91