Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 359 / 578

båÖäáëÜ
59 38 399 D3352
D3352.076.01.13.02
07.2008
5 – 91
Tab 5 5.13 Service routine S017
5.13
S017.9: Configuring operaton without DX41
5.13.7 S017: Test step 9
This service routine is used to configure operation of the system with or with-
out the module DX41. This configuration is necessary for software updates
and module replacement or board DX11 if systems with or without board
DX41 should be supported.
z
Start test step 9 in the same way as described on page 5-78 or by
pressing the
Service key in test step 8.
NOTE
i
If you go to test step 9 from test step 8 by pressing the Service key
≤≤
, the
security access confirmation will be skipped.
Setting configuration without DX41 1. Select the desired device status using the arrow keys of selection field 1.
00 = operation without DX41
(Factory setting for unit hardware versions
≥
BA)
01 = operation with DX41
(Factory setting for unit hardware versions
≤
AG)
After the device status is selected, the
Memory key (XG
Plus
) or the LED above the Memory key
(XG 5 / 3 / 3 PPE) lights up.
1
2
3
+
- 00
n
(
1 2 3
_______00________
XG
Plus
:
Easypad touchscreen XG 5 / 3 / 3 PPE: Multipad
(
n
(
n
R
9