Sirona ORTHOPHOS XG 3 DS, Service Manual

Page: 64 / 578

59 38 399 D3352
2 – 6
D3352.076.01.13.02 07.2008
2.2 System messages Tab 2
2.2
System messages
2.3
Status displays
2.4
Error messages
Error messages are displayed as error codes (Ex yy zz) on the touchscreen
of the Easypad (XG
Plus
), on the display of the Multipad (XG 5/3/3 PPE) or on
the remote control display (if available).
The codes provide you with error type, error location and troubleshooting
information.
Error code: Ex yy zz The error messages are encoded according to the following pattern:
The error messages are sorted by modules in the table on page 2-7.
System code Description Actions required
S100 ORTHOPHOS XG is started
z
Wait, no action required
S110 Exposure cannot be performed.
z
Quit readiness for exposure,
switch unit OFF, wait for 30 sec., switch unit
back ON and observe error messages dis-
played after switch-on.
z
Repeat procedure if necessary
Status displays (for XG
Plus
only) Description
ORTHOPHOS is ready for exposure The unit is ready for operation.
Wait until ORTHOPHOS is ready Unit waiting on readiness for operation.
ORTHOPHOS is ready in XX s The cooling time countdown is running.
X-RAY active! Exposure in progress.
Ex yy zz
Error type
“Troubleshooting”
classification for the
Location
Module, subsystem or logi-
cal function unit
Consecutive number
with error ID