1. Remove the transport pin from the load arm.
2. Remove the locking pin from the swivel axle
and rotate the wheel into the working
position. Reinsert the locking pin.
3. Adjust the position of the dispenser to
ensure that the film will be applied to the
centre of the bale.
4. Add the film roll into the dispenser, ensuring
that it is threaded correctly, and attach the
film to the Cut & Start.
TRACTOR CONNECTION
1. Hydraulics
Red pipe
> Supply (25-30lpm)
Blue pipe
> Return (
Free flow return!!)
2. Electrics
1. Connect 12V supply to 3pin plug
2. Connect wrapper harness to controller
3. Control levers
Mount the control levers in the tractor cab. Place it in
a position that is in comfortable reach to the
operator.
ENTERING THE WORKING POSITION
The quick reference guide is not a substitute for the Operators Manual!
Please refer to Operators Manual for more detailed information
2
1
4
1
3
2
E100 SA QUICK REFERENCE GUIDE
