manualshive.com logo in svg

Siemens SINAMICS G, List Manual

Share
Download
Siemens SINAMICS G List Manual Download Page 665

List of faults and alarms

Faults and Alarms

3-665

 Siemens AG 2004 All Rights Reserved

SINAMICS G List Manual, Edition 12.2004

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40120

Alarm on drive object with object number 20

Reaction:

NONE

Acknowledge:

NONE

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40121

Alarm on drive object with object number 21

Reaction:

NONE

Acknowledge:

NONE

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40122

Alarm on drive object with object number 22

Reaction:

NONE

Acknowledge:

NONE

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40123

Alarm on drive object with object number 23

Reaction:

NONE

Acknowledge:

NONE

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40124

Alarm on drive object with object number 24

Reaction:

NONE

Acknowledge:

NONE

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40125

Alarm on drive object with object number 25

Reaction:

NONE

Acknowledge:

NONE

Cause:

An alarm has occurred for the drive object with this object number.
Alarm value (r2124, decimal):
First alarm that has occurred for this drive object.

Remedy:

Evaluate the alarm buffer of the specified object.

A40126

Alarm on drive object with object number 26

Reaction:

NONE

Acknowledge:

NONE

Summary of Contents for SINAMICS G





























































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands